vsor2000s1 vishay thin film document number: 60009 for technical questions, contact: thin-film@vishay.com www.vishay.com revision: 15-may-07 29 molded, 50 mil pitch, dual-in-line resistor networks surface mount networks v.35 termination network used to insure signal integrity between transmitter and receiver sections of v.35 protocol. features ? lead (pb)-free available ? rugged, molded case construction ? reduces total assembly costs ? saves board space ? compatible with surface mounting equipment ? uniform performance characteristics typical performance schematic * pb containing terminations are not rohs compliant, exemptions may apply actual size abs tracking tcr 100 10 abs ratio tol 1, 2 0.5 a v aila b le p b -free rohs* compliant 20 notes: 1. pad 7 does not exist 2. pin 7 is an open circ u it 19 18 17 16 15 14 13 12 11 50 50 50 50 50 50 125 125 125 51.5 51.5 124 51.5 51.5 124 51.5 51.5 124 1 2 3 4 5 6 8 9 10 standard electrical specifications test specifications conditions resistance range per schematic tolerance: absolute 1.0 % 51.5 and 124 absolute 2.0 % 50.0 and 125 tcr: absolute 100 ppm/c - 55 c to + 125 c tracking 10 ppm/c - 55 c to + 125 c power rating: package 1.6 w - 55 c to + 125 c breakdown voltage 50 v
vsor2000s1 vishay thin film molded, 50 mil pitch, dual-i n-line resistor networks www.vishay.com for technical questi ons, contact: thin-film@vishay.com document number: 60009 30 revision: 15-may-07 surface mount networks dimensions in inches and millimeters derating curve b c part nu m b er date code pin #1 a d v sor20 001s1 h f e g w j inches mm a 0.500 0.010 12.7 0.25 b (ref.) 0.050 1.27 c (ref.) 0.016 0.41 d0.00 8 0.20 e (typ.) 0.030 0.75 f 0.293 0.003 7.44 0.0 8 g 0.025 45 0.64 45 h 0.406 0.005 10.31 0.13 j (ref.) 0.010 0.25 w 0.100 0.005 1.54 0.13 imprinting vsor2000s1 date code mechanical sp ecifications resistive material tantalum nitride substrate material silicon body molded epoxy terminals copper alloy plating tin lead solder lead coplanarity 0.0005" marking resistance to solvents permanency testing per mil-std-202, method 215 lead (pb)-free option 100 % sn matte lead (pb)-free option plated am b ient temperat u re c 0 70 125 150 0 20 40 60 80 100 precent of rated po w er global part number information new global part numbering: vsor2000s1t1 (preferred part number format) global model packaging vsor2000s1 tape and reel t0 = 100 min 100 mult t1 = 1000 min 1000 mult t3 = 300 min 300 mult t5 = 500 min 500 mult tf = full reel 2500 ts = 100 min 1 mult uf = tubed historical part number example: vsor2000s1t/r (will continue to be accepted) vsor 2000s1 t/r model# value packaging or 2 0 0 s 1 0 vs 1 t
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
